M.2 NVME SSD Enclosure M.2 NVME إلى USB3.1 Type-C GEN2 10Gbps Enclosure NVMe PCIE M-Key الألومنيوم محول حالة محرك الأقراص الصلبة خارجي لـ 2230/2242/2260/2280 يدعم UASP مع اثنين من كابل (رمادي)

If you don't know this enclosure or your ssd very well, and have any question or problem, please contact with us!

Features:
1, Adopt JMS583 master chip,true USB3.1 GEN2 transmission. USB3.1 theoretical transmission speed 10GBPS.
2, Supports NVME PCI-E-based M.2 (M key) SSD.
3, Supports Plug & Play and Hot-Swapping, No additional power required.
4, Adopts aluminum alloy shell, slim design, durable and excellent heat dissipation, be portable and easy to carry.
5, Supports 2230,2242,2260,2280 M.2 NVME (PCIE Protocol)M-KEY Interface SSD with Four Specifications.
6, Give a thermal silica film to prevent the hard disk from overheating and causing damage.
7, Supports any OS, like Window2000 / XP / 2003 / Vista / 7 / 8, Linux, Mac OS etc

Standard:

A set of M.2 NVME(PCIE Protocol) to USB3.1 TYPE-C solid state mobile hard disk drive.
Type-c to Type-c USB cable x 1
Type-c to Type-a USB cable x 1
A small screwdriver.
One piece of thermal silica film.
Fixed screw bag.

Please Note: that it supports M.2 NVME PCIE-based SSD only. Not support SATA-based M.2 SSD

Please back up your SSD if you have important data.

You need to format your SSD when you use it for the first time, and then it will work.

For the brand new SSD drive, it may can not find the drive, because the brand new SSD drive should be formated before first time using.
And also need to make the ssd drive partition.

Follow step is to find the brand new ssd drive:

1. use your mouse right key to click Computer， it will show a drop-down menu
2. use your mouse left key to click Computer Managment,
3. use your mouse left key to click Disk Managment

After find the brand new ssd drive, please format it, and made partition. Then you can find the drive normally.