4K2K HDMI Antenna Splitter (Up to 40m)

This 4K*2K hdmi repeater could easily extend your HDMI signal,it extends the range of an HDMI signal by decoding and then regenerating it up to 4K resolution from virtually most HDMI source using exiting HDMI cables.

Delivers a sharp, clear signal from a PlayStation, Xbox, Blu-ray disc player, set-top box, satellite receiver or other video source.

Transmission distance up to 60 meters. 4K: 40 Meters.1080P: 60 Meters.Input Port: 1080P: 0-45 Meters. 4K*2K: 0-25 Meters. Output Port: 1080P: 0-15 Meters.4K*2K: 0-15 Meters.Different cable quality may affect the maximum resolution and transmission, please use high quality HDMI cable.

Designed for plug and play — requires no installation, configuration or external power,this repeater boosts weak signals to reduce or eliminate picture noise,degradation or sparkles on an HD display or projector.

Fully HDCP compliant to protect HD content transmission and ensure quality reception.Supports video amplifier bandwidth up to 1.65Gbps (for 1080p)

product description:

 The HDMI Repeater can extend 40 meters, and the HDMI signal is decoded and re-encoded to regenerate the input HDMI signal into a new standard HDMI signal, so that the signal is not attenuated, and the low-resolution signal can be transmitted longer; no power supply, plug-and-play Easy to install and adjust. Support: 3D and 1080.

specification:

1.HDMI: compliant with HDMI 1.3

2.HDMI HDCP: HDCP 1.1 compliant

3. Operating frequency: 165 mhz

4.HDMI data rate: 1.65 g bps (single link)

5. Input / output resolution: HD: 480i@60hz480i@50hz480mailto:i@50hz576p@50hz720p@60hz720p@50hz1080mailto:p@50hz1080i@50hz1080p@60hz1080p@50hz1080mailto:p@50hzmailto:p@50hzmailto:p@50hz

6. Support 3 d

7. Distance support with twisted pair cable: more than 40 meters

8. Size: (W * H * D): 28 x 13x50mm

working principle:

By amplifying the differential signal of HDMI, the HDMI signal can be transmitted over a long distance, and has signal buffering and amplification capabilities.

Special note: The HDMI amplifier is a passive amplifier and requires no additional power supply. The amplifier has polarity, can not be reversed, INPUT is connected to the input signal source, and OUT is connected to the display device.

A passive amplifier cannot restore a distorted signal, and the effect is to amplify the signal that is to be distorted so that it is not distorted.

For example: 1. To connect a 10 meter and a 20 meter HDMI cable, first ensure that the 20 meter cable can be used independently. If the 20 meter cable cannot be used alone, the signal is already distorted. Not working. On the other hand, 20 meters can be used independently, then you can use the extender to connect the two lines to a distance of 30 meters.

Therefore, if you want to connect the two wires, you must ensure that the two wires can be used alone. One 20 meters and one 30 meters can be used separately, so you can use them with a extender connected to 50 meters.