Note:
1.This product power from POE, need to connect with a 802.3AF Standard 48V POE Switch. Can also be powered by a conventional 12V 2A power supply.
2.This camera default 3MP & H.265, if your NVR do not support 3MP or H.265, you can change our camera into 1080P (2MP) and H.264.
* High Resolution 3.0 Megapixel 1/3'' CMOS Sensor
* Support POE, reduce the trouble of cable arrangement
* Have auxiliary power connector, can use like a Non-POE IP camera
* Support H.265 encode, compare with H.264, transit same quality image only need half of the bandwidth; Record same quality image only need half of the storage
* Also support H.264 encode, so it can be compatible with both H.264 and H.265 device.
* Support audio function, the camera is equipped with a microphone, more convenient.
* P2P Remote Viewing
* Support Motion detection, Email Alarm function
* ABS Plastic Material Shell
* Support iPhone, Android smartphone
Camera
Model: I239-POE-Audio-FHW
Resolution: 2304 x 1296P 3.0 Mega Pixels
Sensor: FH8852+GC2053
Min illumination: 0.1Lux @(F1.2,AGC ON)
Lens: 3.6mm
O NVIIF compliant Port: 6688
Lens interface type: M12
Frame rate: 20fps
Shutter: 1/25 seconds -1/100,000 seconds
Compression Format: H.265/H.264
Compression rate output: 128 Kbps~8Mbps
Storage: NVR or Computer
IP address: Dynamic (Default)/Static
Smart alarm: Motion detection, Email alarm
Support protocol: HTTP, TCP/IP, ICMP, RTSP, RTP, UDP, RTCP, SMTP, DHCP, DNS, PPPoE, NTP
Ethernet: 10/100M mbps Ethernet (RJ-45)
General
Operating Temperature: -25°C~60°C
Power Supply: POE
POE Standard: 802.3af
Dimension(cm): 13cm x 13cm x 6cm
Weight: 0.25kg
Audio
Monitoring range: 5-20 square meters
Sensitivity: -36dB
Signal to noise ratio: 58dB
Pointing characteristics: omnidirectional
Microphone size: φ6mm*5mm
Line sequence: red and black
Package contents:
1 x Camera
