Dual Shaft Nema 17 Stepper Motor Bipolar, 0.5A/24Ncm/48mm Body/4-lead Wires/60cm Cable and Connector Compatible with 3D Printer/CNC

✅ -【Specification】Full D cut, high torque,24Ncm holding torque,NEMA 17 bipolar 42x42x48mm, 4-wire,0.9 deg. step angle(2200 steps/rev),Rated current 0.5A & resistance 1.45 ohms., ✅ -【High Torgue】German tech bearings, low self-inductive reactance, good responsivenes, longer life and low working temperature., ✅ -【Low Noise】The internal rotor of stepper motor adopts German tech. And the surface is coated with imported rotor glue to prevent the burr on the surface caused by the oxidative grinding of carbon steel that cause the motor noise., ✅ -【Low Resistance】The Stepper motor gets low resistanse, thus enables good thermal conductivity. It will work at a safe temperature., ✅ -【Wide Application】This small stepper motors can be used in various area, such as 3D printer; stage lighting; laser engraving; textile machinery; medical equipment; placement machine; non-standard equipment; automation equipment etc.