2,299AED
Out of stock-
Lowest Price
2,099 -
Highest Price
2,299 -
Recent Price Raise
9.5%
2,299AED
Out of stock
Why You Choose ATOMSTACK X7 Pro Laser Engraver?
Product guides and documents, you can download the files:
Installation method: Please see the video, ATOMSTACK S10 Pro Installation Video
Instructions for use: User Manual (PDF), Frequently asked questions: FAQ (PDF)
S10 Pro how to deal with common problems: Troubleshooting Guide (PDF)
50W engraving different material parameters:
(GRBL, free) parameters: Safety Data Sheet (PDF)
(LightBurn, third-party paid) parameters: Specification Sheet (PDF)
Please adjust the power and speed of the engraving machine to achieve the best engraving effect. The specific parameters of different materials are different. If the power is too high and the speed is too slow, it is easy to burn the board. If the power is too low and the speed is too fast, the engraving effect is not obvious.
|
|
|
|
---|---|---|---|
A real 10W laser, Panoramic Filter Coated GlassUpgraded high-performance fixed-focus laser: no need to adjust the focus before engraving; The focal spot area of the new laser is only 1/3 of the spot area of other ordinary lasers, new laser combine precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser. Upgraded dual compression spot coupling technology: ultra-fine laser focus area is reduced to 0.06*0.06 mm, high-density laser can easily cut 20mm thick wood, 15mm thick black acrylic; can directly engrave mirror stainless steel metal, ceramics, glass, and engraving &The cutting speed is 40% higher than the ordinary model, which can be comparable to the effect of the 150W CO₂ laser engraving machine. |
The modular design of the whole group can be freelyinstallation steps
Precise scale lines axis: There are precise scale lines on the X-axis and Y-axis to facilitate quick length measurement. 410x400mm large area engraving interval can meet your various engraving needs |
Higher Laser Power & Faster Engraving SpeedIntegral screw rod: The machine uses an integrated screw rod instead of a combined coupling. The stepping motor and the screw rod are integrated, which makes the movement of the laser more precise and the coupling more durable. Support offline engraving: X7 PRO configures the terminal control panel, supports offline engraving, you can carry out engraving work anytime and anywhere without being restricted by the computer. Expandable engraving size: modular design of the body mechanism, only need to replace the frame components, you can get 410*850mm super large engraving size |
Fixed Focus Laser, No Focus, Adjustment height, More ConvenientNew laser with knob: It is more convenient and quick to adjust the height of the laser.Wide compatibility:The machine can be compatible with various mature engraving software, such as LaserGRBL, LightBurn, support Win XP ,Win 7, Win 8 ,Win 10 ,Win 11, and also support MAC (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF(only LightBurn) etc. |
1-4 Q, A: Please check the page PDF file, X7 Pro how to deal with common problems: Troubleshooting Guide (PDF)
Q: The surface of the control panel is scratched?
A: The control board and the screen are protected by a layer of film, please tear off the film, the control board is not scratched
Q: Can I cut metal? What are the specifications?
A: You can engrave stainless steel and aluminum oxide. If you paint the metal surface black before engraving, the engraving effect will be better, because the unpainted metal surface will reflect light and reflect a large part of the laser energy.
Q: The screen becomes a white screen
A: The screen turns white because the emergency stop button is pressed, and the emergency stop button can be turned clockwise. If the connection fails after updating the driver, it may be related to the computer configuration. It is recommended that the user use offline engraving or cutting.
Q: Does it work on glass?
A : Glass engraving requires you to blacken it.
Engraving area | 410*400mm, Input Format: NC, BMP, JPG, PNG, DXF((only LightBurn)), etc |
Electric power | 50W, Input Voltage: AC100-240V, 50/60Hz, Output Voltage: DC12V, 5A |
Laser output optical power | 10-11W,Focusing method: fixed focus laser, no need to focus, Laser protective cover: Protect the user's eyes and prevent pets from grabbing the laser spot. |
Laser wave | 455±5nm |
Engraving accuracy | 0.01mm |
Net weight of equipment | 4.3kg |
Data transmission type | USB connection |
Focusing type | fixed focus laser, no focusing |
Operating software | Laser GRBL, LightBurn, with Win XP,Win7,Win 8,Win10,Win 11 and Mac system(LightBurn) |
Support offline engraving | Eng raving groups can be built, and multiple machines can work at the same time; 3.5 inch HD screenTouch operation; Ergonomic design |
A real 10W laser module | Can easily cut through 20mm thick wood and 15mm acrylic materials, and engrave large areas |
Engraving objects | Wood, bamboo, cardboard, plastic, leather, PCB board, aluminum oxide, non-reflective Electroplating layer and paint surface layer metal, 304 mirror stainless steel, glass, ceramics, cotton cloth, slate, |
Cutting objects | Cardboard, non-woven fabric, wood board, acrylic, some thin plastic board, sponge,foam |
Others | Emergency stop button; Stopper, Reset switch; The laser sintering temperature is up to 1200℃; replace the frame components, Exptension kit Expandable engraving size to 410*850mm |